User's Manual
Call 24ard
z SIM Card PB
Each record in the SIM Card includes s a name and a number. The saved record must
have a name and a number.
z Handset PB (Smart PB)
Each record in the Smart Phonebook is called a “name card” which may include the
following information:
Name (up to 40 bytes for handset phonebook name, up to 14 bytes for
SIM card phonebook name)
Number (each name card can have up to 5 numbers, and the type of each
number is fixed, in other word, each type just only has one number. Each number
cannot exceed 40 bytes and only can be “0--9”, “*”, “#”, “w” and “p”)
Default Number Type (If the records in the SIM Card are copied or
moved to the Handset, the number will be put in this field)
Phone Number
Office Number
Family Number
Fax Number
E-mail (Up to 100 bytes)
Post Address (up to 128 bytes)
Post Code (up to 10 bytes)
Company (up to 128 bytes)
Note (up to 1024 byte)
Each name card (when created by the user) should include a name (can not be empty) and at
least a piece of other information.
In the Handset PB, the user can group the name cards into “Default”, “Family”, “Friend”,
“Colleague”, “Society” or “Private” (the name and corresponding group icon can be changed).
Different group can have different ringer.
If copy a record from other phone, and this record just only has name not has number, then
our phone can display/search/modify it. But if the user modify this record, he must input other info
besides name.
Add new
When the user add a new number, on the “add new” screen, the user can press [up]/[down]
key to move to others input box and edit area. If the user want to add a big head icon for the new
number, he can click the pictuer box, then it will open the picture list, the use can use direction
key to select a picture and press “OK” key to adopt it, if the user select a more biger picture, the
phone should auto zoom. After finished all input, the user can press “Finish” left soft key to save it
or press “Back” key to cancel.
The record without name can’t be save.