User's Manual

Call 24ard
Mute/Unmute
Reord/Stop record
End all calls
The user alse can adjust volumn by left side up/down key
To end the current call, also can press [On/Off].
During the call, the user can record the conversation. The coding format is only AMR.
5.2.8 Call waiting (second incoming call)
If a new incoming call arrives when the Handset is in call, the Handset will display call
waiting screen and give out four short waiting prompt sounds. The user can
Press [On/Off] key or touch [Reject] button on screen to reject the second incoming call,
and the screen will return to single call screen.
Press [PickUp] key or touch [Accept] button on screen, then the system will
automatically hold the first incoming call and establish talking with the second calling
party.
Touch [Waiting] button on screen, then the sencond incoming call continue waiting.
The user doesn’t make any operation and continue to talk with the first calling party,
then the Handset will return to normal in call screen after incoming call prompt ends
after a while. The new incoming call will be saved in call list with “missed call” icon.
Press numeric keys or [*] and [#], then the Handset will open the scratchpad editor
under call waiting state.
5.2.9 Processing multi-party call
Under this state, the Handset can manage three types of calls at the same time:
The current active call (including the counterpart of the call)
A call in holding
A call in waiting.
When there are calls of the three types at the same time, the user can
Press [Up]/[Down] key on the side of the Handset to adjust receiver volume.
Reject the third calling party and continue with the current active call and the call in
holding.
Press [PickUp] key can activate the waiting call and hold the multi-party call.
When there are a holding call and an active call at the same time, the user can:
Switch calling state between the holding call and the active call (press [PickUp] can
make quick switching)
Press right softkey “Reject” to end the current call
Press red key to end call.
Record the active call
Mute/unmute
Hand free