User's Manual

Call 24ard
5.2.5 Auto redial
For some network calling management failures, the Handset provides auto-redial function (it
is necessary for the user to activate the Auto redial function in Phone settings.)
Before redialing, it will ask user whether redial. Press “OK” or left softkey, then the Handset
will begin automatic redialing. If the user press right softkey/[C] key/ [Home]key/ [On/Off] key,
then don’t auto redial and return to idle state. If there’s an incoming call or the user closer the flip,
the auto redial is end too.
If a new call arrives during the process of redialing, then redialing will automatically ends. In
the interval of two redialing, the Handset will display redialing waiting screen.
If the user close the flip during auto redial, then end auto redial( If the earphone not plug).
The number of auto redialing will not be added into the Call list.
5.2.6 First incoming call
In case of an incoming call, the Handset will
• Give incoming call prompts depending on the current setting (ringer, volume, vibration).
• Switch the screen to the incoming call animation interface. Incoming calls have the
highest priority, thus can interrupt the current screen of any type.
At that time, the user can:
• Press [PickUp] key or “Accept” softkey to answer the incoming call when the
Handset cover is not closed and enter “In call screen”. After the call ends, the
Handset will return to idle state. If “Any key answer” function is activated, then
press any key (except [On/Off]/ [SKR]/ [C]/ [Home] / [UP]/ [Down]/ [Left]/ [Right]
key) can answer the call. If “Auto answer” is activated, then the Handset will
automatically answer the call 10 seconds after it arrives. In this case, the incoming
call will be added into call list. When the Handset cover is closed, plug in the
headset (if it has not been plugged in) or open the cover (if uncover function is
activated) to answer the incoming call.
• Press the [On/Off] key or the “Reject” softkey to reject the call. The Handset will
return to the previous screen. In this case, the incoming call will be added into call
list.
• Reject by touch “busy tone” button on screen.
• Accept by touch “hand free” button on screen.
5.2.7 Single call
During a single call, the user can perform the following operations
In the call option menu,
• Hold
• Namelist
• Send SMS
• Scratch pad
• Dial new number
• Hand free / Cancel hand free