User's Manual

Call 24ard
dialing preparation option list to select “dialing”, “IP dialing”, and then the Handset enters dialing
state. Another way, input numbers under idle state, if the name is display in the matching list,
press up/down key to select and press [PickUp] key to dial. In case of IP dialing, the system will
add an IP special service number before the number input by the user, and then send the number to
the network.
The user also can select a record from the Phonebook or Call list, and press [PickUp] key or
use dialing option to make a call.
If the called party answers, then the screen will display detailed call information, including
the name (or number) of the called party and the call duration; press the volume key on the side of
the Handset can adjust the receiver volume.
Press [On/Off] key screen can end the call, and the Handset will return to Idle state.
5.2.4.1 Dialing an international long distance call
To make an international long distance call, input an international head code (00 or “+”), plus
the country code and the local telephone number of the called party.
To enter “+”, long press [*] key.
5.2.4.2 Emergency call
Whether the Handset is registered on a network or not, the user can dial emergency calls
(“112” or specific emergency calls of the country the user is in).
When insert SIM card, and the phone register network successfully, In idle screen, input an
emergency number and press [PickUp], the Handset will establish a process for the emergency
call.
If the network is not register, then the emergency calls are not saved in Call list.
When there’s no SIM card insert in phone, or register network unsuccessfully, once the user
press a number key, then auto enter “SOS” screen, the user can input number up to 40 bytes. Press
left softkey to call, and press right softkey to back.
When the user insert SIM card, but the SIM card is locked, then the user should input
password. The user press number key to input password, and press left softkey “OK” to confirm.
If the user wants to send emergency all, he should press right softkey “Cancel” to exit PIN input
box and back to idle. On idle state, press number key, then popup PIN input box, press right
softkey “SOS” to enter the “SOS call” screen, the user can input number up to 40 bytes. And then
press [PickUp] key or softkey can directly make a call, and display the dialing animation.