User's Manual

Call 24ard
recording icon display on the screen. No matter handfree or unhandfree, the user can record the
current call. The max recording time is 99 minutes. If the call is end, the recorder auto stop, and
the recording file saved automatically, the saved file name is “Call_DateTime”, for example
“Call_200501101520”.
If the incoming cal is a“data call”，then the screen will prompt“data call”，and there’s only
a“Reject”softkey，the user can’t accept this type call.
When there’s an incoming call or dial a number or during a call, if the number or name is too
long to display on the screen, then add “…” after name or number.
During the phone is connecting with wap by CSD mode, if the user call out a number, then
popup a dialog to prompt the user “Can’t call out, here a CSD data connection now”. If there’s an
incoming a call and the user accept this call, then disconnect the CSD data connection, and back to
idle screen after end the call. If the user reject this call, then continue CSD data conneciton.
If the user dialed number is an emergency call, then the name field display “SOS”.
If the user accept a call when open the flip, if he plug the earphone and close the flip, the call
should not be end.
Input numbers under idle state, if the user press “OK” key then open the call option menu
include “IP Dial”, “Send SMS”, “save” , “Dial”.
If the user dial a number or there’s an incoming call, then the phone should matching all
number filed of each namecard, and should not only matching default number type of each
namecard.
5.2.2 Call information
During a call, the name or number of the call party and call duration time should display on
the screen. If the user end the call, and the total time should display too.
5.2.3 Scratchpad
During a call, once press any of [0]~[9] key, [#] key and [*] key, the scratchpad will be active.
Then the Handset will open the Scratchpad editor, where input numbers and symbols can be
added.
Press “Back”, or press [C] key if the input string is empty, the Handset will return to in call
screen. If the user doesn’t press any key, the Handset will also return to in call screen after 20
seconds and save the Scratchpad content at the same time.
Scratchpad can accommodate up to 160 characters.
In the Scratchpad screen, press [On/Off] key can end all call; press [PickUp] key can
automatically hold the original call and dial the number displayed in Scratchpad.
On occurrence of the following, Scratchpad will be cleared:
a) A new call arrives during a call;
b) A new call is established with a third party during a call;
c) The call ends.
Press “Option” in Scratchpad to enter options list, and then the user can select “IP dial”,
“Send SMS” , “Save” or “Dial” to the number.
5.2.4 Making calls
Input numbers under idle state, then press [PickUp], or press “OK”/left softe key to enter