User's Manual

Call 24ard
Silence Indicates silence function has already been activated.
WAP Alert Indicates WAP alert info comes.
Table 2 Icons Description
For the display position of the icons, please refer to OSG.
The Vibration icon is only effect for incoming call, and don’t effect for sms/mms/alarm
clock/etc. If the user press “#” key to on/off vibration is still only effect for incoming call.
For lock/unlock/SD Card/message/miss call icons, the user can use touch pen to click this
icon to active related function. If the user use touch pen to click SD card icon, then user can
uninstall the SD card, if the user user touch pen to click lock/unlock icon, then enter guard setting
menu, if the user use touch pen to click message icon, then enter inbox open message list, if the
user click miss call icon, then open missed call list.
3.4 C8000 indicator light
Under different circumstance, C8000 indicator light flashing principle is as follows:
z Power on/off moment: the light color is red.
z Working：the light color is blue and flash every 3 seconds.
z charging：no matter the phone is power on or power off, the light is purple and always
shine till the charging is end. After charging, the light resumes original state. If during charging,
there is an incoming call, then the light is same with incoming call.
z Incoming call：the light color display three color: blue-red- purple, and according to
this order to flash every 500 ms.
z Low battery alert: the light color is red, and flash slowly.
3.5 C8000 Earphone operation
The user can accept/reject call by button on the earphone. There are four circs:
1. The user input number on the idle
After the user input numbers, if the user short press the button on the earphone, then call
out the number, if the user long press the button, then back to idle.
2. During the outgoing
When the user dialing out a call, during outgoing, short press the button has no response,
while long press the button to end outgoing.
3. During a call
Short press the button has no response, while long press the button to end the call.
4. During incoming(include second call waiting)
If there’s an incoming call, then short press the button to accept the call, while long press
the button to reject the call.