User Manual

%CNNHWPEVKQPU 
%CNNHWPEVKQPU
5YKVEJQPVJGRJQPG
Normally, you can long press  to switch on the
phone.
You may set a security code (PIN code) on your
phone to protect it from unauthorised use. When you
have set a security code, you will be prompted to enter
the corresponding security code when you switched
on the phone.
1. Enter the PIN code. For security reasons, the
screen will display “*” to represent the numbers
you have entered. If you have entered the wrong
number, press
5 %NGCT to clear it.
2. Press
/ 1- . The phone will validate the PIN
code and commence network registration.
3. Once a network name is displayed on the screen, you
are ready to make or answer a call. If there is no
network name on the screen, you need to re-register.
If you enter a wrong PIN code 3 times in succession,
your SIM card will be blocked. To unblock it, you
must request the PUK code from your operator. If you
enter a wrong PUK code 10 times in succession, your
SIM card will be permanently blocked and cannot be
used anymore. If this happens, please contact your
network operator.
5YKVEJQHHVJGRJQPG
At all times, you can long press  to switch off the
phone.
/CMGCECNN
You can make a call only when the network name
appears on the screen.
1. Enter the phone number.
2. Press
 to dial the number; or press /
1RVKQPU to enter options menu, then select %CNN or
%CNN*CPFUHTGG .
1RVKQPUFWTKPICECNN
During a call, you can press / 1RVKQPU to carry out
the following operations:
- Mute/Unmute the call
- Put the call on hold
-Send SMS
- Access Phonebook
- Activate/Deactivate handsfree
- Record phone conversation (which includes 3
sub-options:
4GEQTF DQVJ , 4GEQTF QRRQUKVG RCTV[
and 4GEQTFQYP )
Πηιλιπσ588.βοοκ Παγε 11 Φριδαψ, Μαρχη 17, 2006 5:04 ΠΜ
BABT CE Certification Application 4.1_Special Instructions