User's Manual

Calls 69
Call divert Set the following call divert options: All
voice calls
, If out of reach, If no reply, If
busy
, All data calls.
• When
All voice calls is on, all
incoming calls will be diverted to the
pre-set number without any
reminder.
• When
If out of reach is on, incoming
calls will be diverted to the pre-set
number when the user is not
connected to the network.
• When
If no reply is on, incoming calls
will be diverted if the user does not
answer.
• When
If busy is on, calls will be
diverted if the user is already online
or if the call is rejected.
• When
All data calls is on, all data calls
will be diverted to the pre-set
number without any reminders.
• You can also check
Status of your call
diverts or
Cancel all call diverts.
Call
barring
This menu allows you to limit the use
of your phone to specific calls by
preventing the reception or making of
different types of calls. To activate call
barring, you need to enter a
communication limit code. This PIN2
code will then be sent to the network
for validation.
Note that this operation only supports
GSM calls.
The types of calls you can bar are as
follows:
 All outgoing calls
 All international calls
 Only here & home
 All incoming calls
 Incoming if abroad
You can also check Status of your call
barring or
Cancel all call barring.
IP dial Select On or Off. If you select On, you
need to enter the IP number.
This feature is only available in Chinese
mainland and Hong Kong.
Philips 598_EnglishMaster.book Page 69 Tuesday, September 12, 2006 10:22 AM