User's Manual

56 Tools
Foreign settings
To set the foreign time zone. The operations and
options are the same as Local time zone. However,
Set
time
option is not available in the menu.
Stop watch
Your phone features a stop watch and the minimum
unit is 0.1 second.
The starting time is 00:00.0, in the format
“mm:ss.n”, where mm stands for minutes of the
watch, which can be any number from 0 to 59; ss
stands for seconds, a number between 0 and 59; n
stands for 0.x second, x being any number from 0 to
9. The stopwatch will start the timing when you press
L
Start or ,. You can pause the timing, press L
Pause, to resume L Continue, to stop the timing,
press
R Stop.
Unit converter
This application allows you to convert many types of
units such as exchange rate, acreage, energy, weight,
power, pressure, temperature and volume.
You need to enter the conversion
Type, Amount, Unit,
Convert to and Quantity. Press + or - to switch between
the different input boxes.
Countdown
This feature is very simliar to the alarm clock, except
that you will be alerted of the remaining time, andthe
phone will emit an alarm at the end of the count-
down. The alarm tone is the same as your alarm clock.
The minimum time is 1 minute. The format of the
time is
hh:mm, and the maximum time input is 23
hours 59 minutes 59 seconds.
You can start the countdown by pressing
, key or the
L
Start. To stop countdown, press L Stop, to reset,
press L
Reset and you can exit the menu by pressing
the R
Back.
When the set time is up, the alert will start to ring and
the ring type is the same with the alarm.
The count-down timer will switch on automatically
and emit an alarm at the end of the count-down even
if your phone is switched off.
Philips 598_EnglishMaster.book Page 56 Tuesday, September 12, 2006 10:22 AM