User's Manual

20 Text and number entry
When the zhuyin combination appears on the input
row, press < / > to move the selection box over the
zhuyin combination and press
, to enter character
selection mode.
Selection
Press < / > to move the selection box left or right, and
press
+ / - to scroll list. When the s election box is on the
desired character, press , to confirm the input and go
into association input mode.
Association
The input area is empty and the candidate area display
a list of association characters. Press the navigation
keys to select an association character, or press a
number key to input a new zhuyin combination.
Stroke input
Press * to select stroke input mode. The strokes are
represented on each key as follows:
The basic steps of Stroke input are as follows:
The principle of stroke input is to dissect and separate
every stroke of a chinese character according to
sequence. When you wish to input the character, press
the keys corresponding to the required strokes
according to sequence to get the desired character.
The stroke input method in this phone classify a
1
2
Horizontal
3
4
Left-falling 5 Vertical 6 Right-falling
7
8 Over-down 9 Special
* Mode 0
# Punctuation
1. Enter strokes 2 to 9
(excluding 3 and 7)
R Clear to clear.
2. Select from candidate list
< or > / + or -
( scroll list)
3. Confirm selection
,
4. Select and enter association character, or return
to step 1 to enter new strokes.
5. Or press R Exit to exit from association
character input mode, then press
, to complete the
editing.
Philips 598_EnglishMaster.book Page 20 Tuesday, September 12, 2006 10:22 AM