User's Manual

parameters of wireless settings, including network name, encryption, keys and the IP
address of network settings.
6、 Modify the working mode settings, select the "enable auto-work mode" option and set
the parameters according to what you want.
7、 After modifying parameters as shown below, click "submit " and select "manually reset
later" in the pop-up dialog box.
Figure3-3 Modify parameters of UART-WIFI module
2.3 Testing
1、 Run TCP / UDP debugging software, create a TCP Server whose detecting port is
60000.
2、 Run serial debugging software, such as RealTerm.exe in this case. Modify parameters.