User's Manual

1 Introduction
TLG13UA06 is a new generation embedded Uart-Wifi modules studied by CEC Huada
Electronic Design Co., Ltd (here in after referred to as HED). Uart-Wifi is an embedded
module based on the Uart, according with the WiFi wireless WLAN standards, It accords
with IEEE802.11 protocol stack and TCP / IP protocol stack，and it enables the data
conversion between the serial device and the wireless network module. Through the
Uart-Wifi module, the traditional serial devices can easily access to the wireless network.
TLG13UA06 does a comprehensive hardware and software upgrades based on the
products of the earlier generations, now it’s more functional and more convenient to use, its
main features include:
Interface:
 2*4 pins of Interface: HDR254M-2X4
 The range of baud rate: 1200~115200bps
 RTS / CTS Hardware flow control
 single 3.3V power supply
Wireless
 support IEEE802.11b / g wireless standards
 support the range of frequency: 2.412~2.462 GHz
 support two types of wireless networks:
Ad hoc and Infrastructure
 support multiple security authentication mechanisms:
WEP64/WEP128/ TKIP/CCMP(AES)
WEP/WPA-PSK/WPA2-PSK
 support quick networking
 support wireless roam
Others
 support multiple network protocols
TCP/UDP/ICMP/DHCP/DNS/HTTP
 support two types of work modes:
auto and command
 Support the transparent transmission mode
 support AT+ instruction set
 support a variety of parameters configuration methods: