User's Manual

3 Configuration management manual
3.1 Configuration through configuration management software
3.1.1 Introduction
We offer a configuration hypervisor that can manage TLG10UA03 module expediently，
for configuration querying、config、function test etc，its main function includes,
 module management
 managemant through serial
 managemant through wireless connection
 parameter configuration
 modify/query module parameters
 import/export parameters
 modify parameters for a group of modules
 resume to default setting
 function test
 wireless network command test
 socket command test
 AT+ instruction test
 firmware upgrade
 system information query
3.1.2 Module management
3.1.2.1 Management through serial connection
1、 Connect the TLG10UA03 module to the serial adpater，then turn it power-on；
2、 Open the UART-WIFI configuration hypervisor，select the port number of connection
from port list，you can select ‘auto’ unless you make sure；
3、 Click ‘search module’，if the connection port is selected to ‘auto’ and the computer has
more than one serial，it maybe expend a long time for searching, The following sketch
map will show after search completed：