User's Manual

CEC Huada Electronic Design Co., Ltd 6
1.5 Production Appearance
Figure 1-1 Wireless Adapter Appearance
2 Installation
2.1 System Requirements
(1) Windows XP operating system
(2) A computer or laptop with an available USB port（4 PIN 2mm space needle type, with
3.3V power supply; or need a 5V to 3.3V conversion card）
2.2 Adapter Installation
Please plug the wireless network adapter into the 4 PIN 2mm space needle interface.
Notice:
IF only use for test,you can use a 5V to 3.3V conversion card. Please plug the wireless network
adapter into the conversion card.
2.3 Driver and Management Software Installation
2.3.1 Driver Installation
Notice ：
The window of installation has a little difference in the different computer.
The steps for setting up wireless network adapter:
(1) Please insert HED wireless network adapter.
(2) After computer detecting the adapter automatically, the Found New Hardware