User's Manual

CEC Huada Electronic Design Co., Ltd 13
2.4 Uninstall
To remove the AirQuick Wireless Network Config Tool:
Click Start →All Programs → HED→Airquick Utility v2.0.6 For WinXP English
Version → Uninstall Airquick Utility v 2.0.6
To remove the Adapter:
Right-click on the My Computer icon →Properties →Hardware → Device Manager →
Network Adapters→ Right-click on the HED08W04SUA Device icon →Uninstall
3 Configuration Wireless Network Adapter
You can use AirQuick Wireless Network Config Tool or Wireless Zero
Configuration to configure wireless network adapter.
3.1 Choose/Switch Wireless Network Configuration Program
Notice:
Please skip over this section when your operating system is not Windows XP.
AirQuick Wireless Network Config Tool offers the function that it can switch to
Wireless Zero Configuration. Minimize the AirQuick Wireless Network Config Tool,
right-click on the icon in the system tray (lower right corner of the screen). Select Use
Windows Zero Configuration, you can use Wireless ZeroConfiguration.
When you in the state of Wireless ZeroConfiguration, click the icon of AirQuick
Utility V2.0.6, you can use AirQuick Wireless Network Config Tool.
3.2 Introduction of AirQuick Wireless Network Config Tool
3.2.1 Network Management
Network Manage window is shown in figure 3-1.The meaning of the field is shown in
table 3-1.