Datasheet

ManualsBrandsCebek ManualsDevelopment Boards & KitsDigital timer module

DIGITAL TIMER 1 Time

set by POTENTIOMETER

I-300

TECHNICAL CHARACTERISTICS

Alimentation ... ..... ................................. 12-24 V dc

Consumption maximum........................... 65 mA

Relay Output / Maximum ........................ 230 V / 3 A max

Minimum Time.......................................... 0.1 seconds

Maximum Time.......................................... 60 minutes

Net weight ... ......................................... 54 gr.

Dimensions............................................ 87 x 72 x 26 mm.

Recommended Power Supply ….......... FE 103

Optional DIN rail .................................. C-7566

GENERAL CHARACTERISTICS

It has 14 operating modes

There are 16 time scales

Time setting potentiometer

POWER LED lights when the timer is powered

RLY Led lit when the relay is activated

Timer dips to select the timer you want to model

Dips Timer RANGE to select the timer operating margin

ADJUST knob to select the working time of the timer

START button input can start the timer (depending on model)

RESET input allows to stop the timer at any time

Output relay contacts open / closed voltage free

Alimentation

Star / Stop

relay output

www.cebek.com - sat@cebek.com

Summary of content (5 pages)

PAGE 1
DIGITAL TIMER 1 Time set by POTENTIOMETER I-300 TECHNICAL CHARACTERISTICS Alimentation ... ..... ................................. 12-24 V dc Consumption maximum........................... 65 mA Relay Output / Maximum ........................ 230 V / 3 A max Minimum Time.......................................... 0.1 seconds Maximum Time.......................................... 60 minutes Net weight ... ......................................... 54 gr. Dimensions............................................
PAGE 2
I-300 Types of timers FUNCTION Monostable / button Monostable / Voltage Monostable / Pausable / button Monostable / Reset / Button Monostable / button for opening Monostable / retriggerable / button Monostable / Cumulative / button Set delay start on / Tension Set delay start on / Push Set delay start on / retriggerable / button Set delay start on / Cumulative / button Activator-retardant / button Activator-retardant / retriggerable / button Activator-retardant / Cumulative / button 1 - Pushbutton Monosta
PAGE 3
I-300 9 - Delay start launched by button (Equivalent R 36/37) Closing the STAR button starts the timer without connecting the relay. When time is connected to the relay, it is fixed to disconnect power 10 - Delay start button retriggerable by Closing the START button starts the timer without connecting the relay. If timing is closed during the START button resets the timer and start the time again. When time is connected to the relay, it is fixed to Food disconnect.
PAGE 4
I-300 TIMER PROGRAMMING. IMPORTANT. The timer as supplied factory is not recorded in any kind of timer, or time to work, you must schedule it before first use. Failure to act as a type 1 program, time 1 second. STEPS TO SET THE TIMER Disconnect the power Select TIMER dips in the desired pattern Select from the TIMER SCALE Dips desired time interval Select the desired time adjustable potentiometer Once these 3 steps connect the power and the timer is programmed and and ready to work. Note.
PAGE 5
I-300 EXAMPLE OF INSTALLATION Transformer Output Fuse switch Tension adjustment www.cebek.com - sat@cebek.