Portable energy storage power supply EA500-518WH-1XX Version A0 (XX, indicates different colors, such as BK, GN, YE) Product use and technical specification Please read the manual carefully and follow the instructions before using CEA ELECTRIC CO.
Applicability This manual is applicable to the following products: Portable energy storage power supply EA500-518WH-1XX(XX, indicates different colors, such as BK, GN, YE) Disclaimer . has no warranty for accuracy, adequacy or applicability of the information in the manual, as we will continue to improve products.
I. Product Application and Scope of Use Product name: portable energy storage power supply Model/Specification: EA500-518WH-1XX Product features: (XX, indicates different colors, such as BK, GN, YE) 1. This product has long endurance; 2. Using lithium iron phosphate battery core, safe and reliable, with lots of cycle times and long service life; 3. Flexible charging, small and light, portable; 4.
II. Product introduction 1. Composition Portable energy storage power supply is mainly composed of housing, inverter, display screen, main control panel and lithium iron phosphate battery 2.
II. Product introduction Remarks: 1. Press and hold LED light button + main power button for 3 seconds, display screen will reset and restart; 2. When the AC output is off, press and hold the main power button + AC button for 3 seconds to switch the frequency between 50 and 60HZ; 3. Long press the AC button to turn on or off the buzzer; 4. After the main power button is turned on, if other functions are not operated for three minutes, it will enter the sleep mode; 5.
II. Product introduction 3.
III. Technical parameter Project Parameter Lithium iron phosphate soft Battery capacity Product size Product weight package 518WH 298*220*213mm 7.5 kg Use ambient temperature range -10 ~ 40 ℃ Storage temperature -10 ~ 40 ℃ Input Type-c2 Input 100W 5V3A 9V3A 12V3A Charging Solar charging 15V3A 20V5A 100W (11-23V 5A) Mains electricity 140W (100-240V 1A) charging Single discharge 30W 5V3A 9V3A 12V2.5A 15V2A Output Type-c1 output 20V1.5A Support PD/QC3.0/QC2.0/AFC/BC1.
Bidirectional charge and discharge PD100W 5V3A Type-c2 Input/Output 9V3A 12V3A 15V3A 20V5A Support PD/QC3.0/QC2.0/AFC/BC1. 2/APPLE and some other fast charging protocols 18W fast charging: supports USB A1 Output QC3.0/QC2.0/AFC/BC1.2/A PPLE and some other fast charging protocols 5V3A 9V2A 12V1.5 A 18W fast charging: supports USB A2 Output QC3.0/QC2.0/AFC/BC1.2/A PPLE and some other fast charging protocols 5V3A 9V2A 12V1.
IV. Operation and use methods 1. Charging steps and methods: 1.1 AC charging only needs one end of a power cord to be inserted into the charging socket on the back of the equipment, and the other end connected to mains electricity. The input voltage range: AC is 100-240V 50/60 Hz, and the power is 140W; 1.2 DC charging products support input voltage range DC: 11-23V 5521 interface.
ordinary lighting and flashlight lighting. The control sequence of the switch button is: lighting 1 bright/lighting 1 flash/lighting 2 bright/off; 5. How to use wireless charging: Place the mobile phone in a position marked with a wireless charging area on the top of the device, and turn on the main power button and the USB button in turn; V.
VI. Product maintenance 6.1 Newly purchased products shall be fully charged before use; 6.2 Regularly remove the dust and dirt at the cooling window; 6.3 Under the condition of long-term storage for more than 3 months, at least 50% of the electricity power shall be stored; 6.4 If stored for more than 6 months, please charge and discharge the product for 1-2 times in order to prolong the service life of the battery; VII. Warnings and notes 7.
environment, wet and rainy environment during use and placement, otherwise it may cause dangerous situations; 7.4 This product has a built-in high-voltage power supply, and non professionals are not allowed to disassemble it by themselves; 7.5 Please do not discard this product at will after its service life. Please recycle it according to local laws and regulations; 7.6 The product shall be protected from rain, water immersion and violent vibration during transportation; 7.
VIII.
CAUTION A photovoltaic panel as an input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No. 60950-1, or UL 1310 and No. 1, CAN/CSA C22.2 No. 223, or No.1, CAN/CSA C22.2 No.
l) When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way. m) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. n) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
