Technical Specs

IV. Operation and use methods
1. Charging steps and methods:
1.1 AC charging only needs one end of a power cord to be inserted into the
charging socket on the back of the equipment, and the other end connected to
mains electricity. The input voltage range: AC is 110V 60 Hz, and the power is
1100W;
1.2 DC charging products support input voltage range DC: 11-60V 400W 10A
Anderson PP30 interface. Check the input voltage range before charging and
insert the input interface into the PP30 interface in the upper left corner of the
front of the equipment to complete DC charging;
2. How to use the output with load:
2.1 AC load: check that the power range and voltage range of on-load electrical
equipment should match with this equipment before use, insert the power plug of
on-load products into the output socket of the equipment, turn on the main power
button and AC output button in turn, and the display screen shows the output on-
load power;
3. How to use DC/USB output:
Before use, check that the voltage and corresponding parameter range of the on-
load electrical equipment should match with this equipment, insert the interface
plug of the on-load product into the corresponding interface of the equipment, and
turn on the main power button and DC/USB button in turn;
4. How to use lighting:
The lighting switch button is located at the handle, and the lighting is divided into