Instructions

3. Explanation of Symbols

This symbol is used when your health is at risk, e.g. from an electric shock.

The symbol with the exclamation mark points out particular dangers associated with handling, function or operation.



The „Hand“ symbol indicates special advice and operating information.

4. Scope of Delivery

• GSM module

• Control software

• USB cable

• GSM aerial

• Closing plug

• Operating instructions (on CD)

The following components not included in the delivery of the GSM module are also required for assembly and operation:

• An activated SIM card from any provider

• A mobile phone without Sim lock (to configure the SIM card of the GSM module)

• Power supply 5 - 30 V/DC, 1 A (e.g. solar rechargeable battery or stabilised mains adapter)

• Suitable connection lines for supply voltage and connection of the in- and outputs

• Optionally, depending on use of the in- and outputs, you additionally need up to 12 relays (Conrad item no. 502892) or relay PCBs (Conrad

item no. 585498)

• Optionally, depending on use of the in- and outputs, you need 1 or 2 temperature sensors (e.g. Conrad item no. 198896)

• Optionally, you require an email address with an email provider where you can log in with a password.