Instructions / Assembly

8
Installation (continued)
3
Attaching the mounting
plate
4
Attaching the mounting
brackets
□ Position the mounting plate (A) over the
installation holes. Ensure that the plate is
level.
□ Attach the mounting plate (A) to the wall using
lag bolts (BB). Use a level to ensure that the
plate is level on the wall.
□ Tighten the bolts using the hex wrench (EE).
CAUTION: Tighten the lag bolts so that the
wall plate is firmly attached. Do not overtighten.
Over-tightening can damage the screws, greatly
reducing the holding power.
□ Position the left and right mounting brackets (B
and C) on either side of the mounting plate (A)
and push them together until they snap into
position on the mounting plate (A).
5
Attach the mounting arm to
the mounting plate
6
Installing the mounting pads
□ Align the holes of the mounting arm (D) over
the face plate on the mounting plate (A) and
attach the arm (D) to the plate (A) using the
two mounting arm screws (DD). Securely
tighten.
□ Snap the front (E) and back (F) mounting pads
onto the tabs (1) of the mounting arm (D).
A
BB
BB
A
C
B
A
A
D
DD
1
E
D
F