Instructions / Assembly

8
Installation (continued)
3
Testing the screw length
4
Attaching the brackets to the
TV
□ Test the selected screw length by screwing
them in by hand to ensure proper fit. Do not
tighten. If there is any resistance, remove
immediately and select another size of screws
and washers (AA – KK).
□ Center the brackets (B and C) vertically to the
back of the TV. Ensure that the left and right
mounting brackets (B and C) are no more than
24 1/2 in. (623 mm) apart.
□ For curved or recessed backs, place the correct
sized spacers (LL – OO) over the mounting
holes on the back of the TV.
□ Attach the left and right brackets (B and C) to
the back of the TV using the properly sized
screws and washers you chose in steps 1 and
2.
CAUTION: Tighten the screws so the
brackets are firmly attached. DO NOT
OVERTIGHTEN. This may damage your TV.
Correct
Incorrect
or
BC
or