Instructions / Assembly

Installation (continued)

Attaching the wall plate

Mounting the TV to the wall

plate

□ Position the wall plate (A) over the installation

holes. Ensure that the plate is level and that the

UP symbol is on top of the wall plate and

pointing up.

□ Attach the wall plate (A) to the wall using lag

bolts and washers (QQ). Tighten the bolts in a

criss-cross pattern.

CAUTION: Tighten the lag bolts so that the

wall plate is firmly attached. Do not

overtighten. Over-tightening can damage the

screws, greatly reducing the holding power.

□ Loosen the safety screws (1) preassembled to

the left (B) and right (C) mounting brackets.

□ Plug any cables into the TV as they could be

difficult to reach after the TV is mounted to the

wall.

□ Using two people, carefully lift the TV and align

the brackets (B and C) with the wall plate (A).

□ Gently lower the TV onto the wall plate (A),

ensuring that the brackets (B and C) catch at the

top edges of the wall plate (A).

CAUTION: Hold the TV in place until the safety

screws are secured in step 9.

Correct

Incorrect