Users Manual

4.0 PACKING LIST

Before using this product, check the packing list to make sure the

following items are included:

 Product machine×1



User manual×1

 A to C charging cable×1

5.0 OPERATING INSTRUCTIONS

Wireless charging protocol

1. Connect the wiring of AtoC to the type-C of the product. Connect

the other end of the wiring to the adapter. The white light flashes

once when powering on and then goes out.

2. Place the device (mobile phone that supports wireless charging,

etc.) on the wireless charging appliance (Logo: Qi), and you can

start charging. The white light that is always on indicates that you

are charging. After charging, the white light should always be on.

3. Please remove the full equipment in time.

Note: Amber light is always on in case of failure

Operation procedure of disinfection work

1. Put the phone that needs to be disinfected into the product, close

the lid and press the Key to start the disinfection.

2. Press the button for the first time, LED1 lights up, indicating the