Specifications

www.MCMelectronics.com / 1-800-543-4330
129
7
Section
7
Audio/Video
Distribution
AUDIO/VIDEO
In-Line
Amplifier
DC line powered amplifier for CATV or antenna
applications. Bandwidth is 5~950MHz. Gain is 10dB.
Use with #33-915 power supply.
Order # (1-9) (10-up)
33-2690 $12.49 $11.62
In-Line Surge
Protector
Protect your cable
modem, tuner,
convertor, decoder,
and satellite receiver
from power surges
and spikes caused by lightning strikes. Plugs directly
into coax line. Specifications: •Frequency range:
5~2,400MHz •Insertion loss: 1.5dB max •Max surge
current: 5000A
Order # ONLY
33-10400 $7.06
Outdoor Mast
Mounted Amplifier
This powerful UHF/VHF antenna signal amplifier is
designed to overcome signal loss related to long cable
runs, splitters, and junctions. While an amplifier will
not create a signal, it will increase its power and
minimize disruptions. Kit includes •Mast mount
amplifier •110VAC power inserter •6' coaxial cable
Frequency range: •40~862MHz •18db gain
•Mfr. #PA18.
Order # ONLY
30-2091 $50.49
Economical Antenna Rotator
Our economical antenna rotator helps improve TV and
FM reception. Two piece connects via three wire rotator
cable. Adjustable clamp accommodates mast up to 1
1
⁄2".
Order # ONLY
30-1100 $60.99
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine cut
gears won’t bind •Brake
pads hold firm •Tested to 70
mph winds •Requires three–
wire rotator wire (#24-3080)
Order # ONLY
30-1020 $80.99
UHF/VHF Antenna
Mast-Mount Combiner
•All-weather antenna combiner merges the signals from
a UHF antenna with a VHF antenna on the same down
lead •Ideal for FM reception and markets with high
band VHF HDTV channels •Threaded “F” connectors
•Mast-mount weatherproof housing •Adjustable mast
clamp •75ohm output
Order # ONLY
30-2113 $18.99
Closed
In-Line Amplifiers
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB
•Maximum input: 20dB
•Maximum output: 31dB •Noise
figure: 4dB •Power requirements:
15VDC •Dimensions: 2
1
⁄2" (L) x
5
⁄8" (dia) #33-910 DC
Passive: For satellite 70MHz in-line amplification
when power dividers, low gain LNAs and down
convertors require additional gain. #33-917 Non-
Passive: For MATV/CATV applications when antenna
preamplification and line amplification is required.
#33-915 Power Supply: Provides power supply
(15VDC) and diplexer for #33-917 and 33-910.
Order # Type (1-9) (10-up)
33-917 Non-Passive Amp $13.99 $11.88
33-910 DC Passive Amp 7.36 6.92
33-915 Power Supply 14.99 13.42
#33-917
#33-910
#33-915
Push-On Balun
•Quick connect for “F” fittings with
impedance matching transformer
•Minimum five
Order # (5-9) (10-up)
33-010 $0.46 $0.43
Rotator Cable
Three conductor cable
for use with many
popular antenna rotators. Outer jacket 0.162" black
PVC with 0.020" wall. Three 20AWG conductors color
coded black, white and red.
Order # Length (ea.) (2-4) (5-up)
24-3080 100' $30.49 $23.02 $21.43
24-3085 500' 131.00 106.00 98.00
24-3090 1000' 232.00 190.00 175.00
RG-6/U CL2-Rated Coax Cable
RG-6/U type coax cable. 18AWG solid bare copper
center conductor. Mylar aluminum foil shield plus
40% aluminum braid provides 100% shield. Foam
dielectric and PVC jacket. Outside diameter .270"
nominal. Impedance 75ohm nominal. Perfect cable
for high frequency cable systems, satellite television
and DBS. CL2 rated for in-wall use.
Order # Length (1-3) (4-up)
24-10200 500' $45.49 $39.14
24-10201 1000' 111.00 97.00
TM
RG-59/U Copper Braid
•22 gauge solid copper-covered steel weld •Foam
dielectric •80% nominal copper braid shield •.240"
(O.D.) nominal •75ohm nominal impedance
Order # Length (1-3) (4-8) (9-up)
24-10265 500' $41.49 $39.14 $37.08
24-10266 1000' 72.49 68.50 64.89
TM
TITAN 2TM Mast Mounted
Preamplifiers
The Titan range of mast
mounted amplifiers has
been completely
re-engineered and
updated. These
amplifiers
represent the
ultimate in
preamplifier performance. They are designed for
use as an ultra low noise, ultra high gain preamplifier
for deepest fringe applications and MATV headend
applications. Their very high signal handling also
makes them suitable for use as a mast mounted, ultra
low noise distribution amplifier for use in small MATV
systems. Both models feature 75ohm, input and output
connections in line with modern headend engineering
practice. Models 7777 and 7778 cover both VHF and
UHF bands with separate amplification in each band
for maximum signal handling. They may be configured
for either separate or combined VHF and UHF inputs.
They include a switchable FM trap.
Order # Mfr. # VHF Gain UHF Gain ONLY
33-8960 7777 23dB 26dB $70.99
33-8965 7778 16dB 23dB 62.99
Tapcon
®
Self-Tapping Concrete Anchors
•Designed for use with high powered drill and hammer
drivers •Climaseal™ coated for excellent corrosion
protection •Works on all masonry materials, excellent
for exterior walls •Self tapping design cuts their own
threads •Fully removable •
1
⁄4" diameter •100 per box
Order # Length (1-3 boxes) (4 boxes-up)
28-8851 1.25" $27.99 $25.70