Specifications

www.MCMelectronics.com
/
1-800-543-4330
109
7
Section
7
Audio/Video
Distribution
AUDIO/VIDEO
VideoEase™ VGA Balun II Over UTP
VideoEase™ VGA Balun II is a passive device that fully
supports VGA and SVGA (RGBHV) transmission via
one Cat 5 UTP cable without the need for shielded
twisted pair (STP) cable. This breakthrough technology
allows VGA equipment to be deployed more easily in
both new and pre-wire structured cabling environments.
Used in pairs, sold individually.
Order # Description Mfr. # ONLY
33-9601 PC side (HD15-male) 500040 $79.99
33-9602 Monitor side (HD15-female) 500041 79.99
33-9603 Monitor side (HD15-male) 500042 79.99
33-11355 PC side (HD15-female) 500043 68.99
Active VGA Balun II Kit
Complete two piece kit allows VGA video, plus stereo
or digital audio and RS232 to be transmitted via a
single Cat 5e/6 cable. It is DDC compliant and works
in conjunction with separately available IR emitter
and sensors to support IR source control. Resolution
up to 1920 x 1200 is supported at distances up to 600',
and manual brightness, sharpness and skew adjustments
are provided. Full ground loop isolation is also
provided between transmitter and receiver. In addition
to the Cat 5e output, the transmitter also provides local
monitor connection.
Order # Mfr. # Type (1–3) (4–up)
33-11425 500145 Complete kit $699.00
33-11480 500998 IR emitter 12.49 $11.89
33-11485 500999 IR sensor 21.19 19.99
Back
Back
Transmitter
Receiver
VGA and Audio Balun
This active VGA/Audio balun allows VGA and stereo
or digital audio to be transmitted via CAT5e/CAT6
cable. The product also supports RS232, is DDC
compliant and supports IR source control. Features:
•Transmits signal up to 600' @ 1920 x 1200 •Supports
analog stereo or coaxial digital audio •Supports RS232
or IR control •Brightness, sharpness and skew
adjustments •Local VGA/Audio output
•Ground loop isolation
Fig. Order # Mfr. # Description ONLY
A 33-11220 500146 Transmitter $339.00
B 33-11221 500147 Receiver 425.00
A
B
VGA Wall Plate Baluns
Interchangeable with VGA balun
models 500040/41/42/43, these
units fit in a single gang box and
are compatible with decora style
wall plates. Sends VGA video
over standard CAT5e/6 cable at
distances up to 350'. •Baluns must
be used in a pair consisting of
one PC side, and one monitor
side balun.
Order # Mfr. # Type ONLY
33-11495 500041-WP-US Monitor side $89.99
33-11500 500043-WP-US PC side 89.99
Videoease PS/2 Convertor Balun
•Allows PS/2 devices to be located
up to 350' away from the PC •Using
inexpensive 4-pair Cat 5 shielded twisted pair or
unshielded twisted pair cable depending on the
equipment used •Used in pairs, eliminates the need for a
local keyboard and mouse •Typical applications include
corporate projection systems, classroom video
instruction and video information systems
•Mfr. #500045
Order # ONLY
33-10105 $27.99
Videoease Active VGA Balun Kit
•Extends the distance between the computer system
unit and a remote display monitor by up to 480'
•It accomplishes this by means of a local transmitting
unit, and remote receiving unit, connected by standard
Cat 5 twisted pair ethernet cable Features: •Uses Cat 5
ethernet cable: For economy; easy installation; and
utmost data transfer reliability •High-resolution video:
Up to 1800 x 1440 at 100 meters •Supports VGA and
SVGA monitors •Long distance transmission, up to
160m (480') •Local unit includes port for local monitor
•Mfr. #500035
Order # ONLY
33-10120 $309.00
VGA 4 x 1 Switcher
Compact switcher allows a single display to select
from up to four VGA sources, when Muxlab baluns
are utilized, At the Cat 5e/6 cable. It operates in
conjunction with Model 500140 active balun kit,
and Model 500141 transmitter. At least one 500140 is
required to support one source and one display, then
up to three additional 500141 transmitters may be
added. Features: •Auto and Manual switching modes
•Manual, IR, RS232 and USB control •Plug and play –
DDC1 compliant •Remote power up to 150' •Modular
RJ45 on output and each input •Supports up to 1920
x 1440, 1080p •Includes GUI software and IR remote
•Mfr. #500160
Order # (1–3) (4–up)
33-11430 $499.00 $475.00
CATV Balun
The VideoEase
CATV Balun
allows
traditional
75ohm coaxial
cable to be
replaced by a
single pair of Cat 5 UTP cable in the CATV, VHF and
FM environments in certain applications. The CATV
Balun allows broadband CATV equipment to be
integrated into structured cabling systems thereby
allowing CATV equipment to be moved or added to
any convenient modular wall outlet. The CATV balun
works in conjunction with CATV splitters, amplifiers
and cable modems for a total cabling solution.
Mfr. #500302 Features: Low return loss eliminates
“ghosting”. Pair required for use, sold individually.
Order # ONLY
33-9630 $47.99
CATV Distribution Hub
Designed to be used with the Muxlab 500302 CATV
balun, this hub allows cable TV, off-air, broadband
and other RF video to be distributed to up to eight
television receivers, recorders or similar devices, via
Cat5 cable. It provides gain amplification and port
buffering as well as ground loop isolation. Features:
•900MHz bandwidth •CATV, Internet, digital cable
support •Bi-directional transmission •Single "F"
connector input, eight RJ45 outputs.
Order # Mfr. # Description ONLY
33-11440 500300 1 x 8 hub $629.00
33-9630 500302 CATV balun 47.99
Back
Dual Audio/
Video Balun
Allows up
to two composite
video signals
and up to two
unbalanced audio
signals to be
transmitted via
unshielded twisted pair (UTP) cable in a point-to-point
connection. Also works in conjunction with MuxLab’s
Audio/Video Distribution Hub (#500200) allowing
audio/video programming to be distributed via UTP
to up to eight locations. Mfr. #500012. Up to 2200'
(670m) Pair required for use, sold individually.
Order # ONLY
33-9610 $65.99
NEW!
NEW!
NEW!
NEW!