Specifications

www.MCMelectronics.com / 1-800-543-4330
122
Follow us on: &
Section
7
Audio/Video
Distribution
AUDIO/VIDEO
7
50MHz~1HGz
Broadband
Amplifier
Ultra low noise
amplifier employs
high output push-pull design, with frequency range
of 50MHz~1GHz, providing up to 34dB gain.
Additionally, a passive 5~42MHz return path enables
use with cable TV systems that utilize interactive digital
boxes and broad band internet service. Variable gain
and tilt adjustments allow installer to compensate for
a wide range of cable lengths. Features: •Wide forward
frequency range: 50MHz~1GHz •Ultra low noise figure
•Push-pull SMD strip line circuit design •-20dB input
and output test •115VAC operation, no space
consuming AC adapter Specifications: Forward
frequency range: 54~1000MHz •Forward gain: 34dB
•Gain adjustment range: 15dB •Max input level +5 dB
•Max ouput level: 39dB •Return frequency range:
5 ~ 42MHz •Return insertion loss: 2.5dB •Power
requirements 117VAC, 60 Hz, 6 W •Dimensions
2" (H) x 33/8" (W) x .8" (L)
Order # (1-9) (10-up)
33-2675 $156.00 $148.00
Distribution Amplifiers
•Commercial grade distribution amplifiers can be
used for HDTV, CATV, off-air, analog, and digital
RF distribution •Weather sealed housings •Average
noise figure: 2.8dB •50~1000MHz
Order # Mfr. # Description Gain ONLY
30-2124 3410 1-way 15dB $35.49
30-2125 3412 2-way 11.5dB 42.49
30-2130 3414 4-way 8dB 47.49
30-2135 3418 8-way 4dB 60.99
#30-2124
#30-2125
#30-2130 #30-2135
Bi-Directional CATV Amplifiers
Digital
amplifiers with
return path for
use with CATV
convertors (pay
per view) and
cable modems.
Soldered back
ensures isolation and signal integrity. Specifications:
Bandwidth: 54~1000MHz. Noise figure: 3.5dB. Power:
12VDC, 250mA via included adapter (using “F” cable).
Order # Forward Gain Reverse Gain (1-9) (10-up)
33-7110 15dB 0dB (Flat) $43.49 $39.51
33-7111 15dB 10dB 48.49 43.38
33-7115 15dB 15dB 48.49 44.46
UHF/VHF/FM 25dB
Amplifier
Features: •Low noise
•Lightning protection
•AC power indicator
•Switchable FM trap
•Low cost Specifications: •Bandwidth: 54~900MHz
•Gain: VHF, 25dB; UHF, 22dB •Maximum input: VHF,
18dB; UHF, 16dB •Maximum output: 40dB
(54~800MHz) •Noise figure: VHF, 5dB; UHF, 7dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 5
7
⁄8" (W) x 1
5
⁄8" (H) x 3" (D)
Order # (1-9) (10-up)
33-0450 $28.49 $27.64
UHF/VHF/FM
36dB Amplifier
Features:
•Low noise
•Two switchable
FM traps
•Separate gain
controls •AC power indicator •50dB output capability
•-20dB monitor output •Fuse protected Specifications:
•Bandwidth: 54MHz~108MHz, 174MHz~216MHz,
470MHz~812MHz •Gain: VHF, 31dB; UHF, 36dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 8
3
⁄4" (L) x 1
7
⁄8" (H) x 3
3
⁄4" (D)
•Fuse protected
Order # (1-9) (10-up)
33-0890 $95.99 $88.97
Four-Way
Amplified Coupler
•50MHz~550MHz
bandwidth •1~3dB
gain •117VAC power
required •One input,
four outputs
•Dimensions: 3
1
⁄2" (W) x 2
1
⁄4" (H) x 1
1
⁄2" (D)
Order # (1-9) (10-up)
33-1475 $13.99 $12.61
RF Amplifiers
Low noise VHF/UHF/FM signal amplifiers. Variable gain control
–10dB. Built–in FM trap (-20dB). Specifications: Frequency range:
40~862MHz. Noise figure: <7dB. Power: 120VAC.
Fig. Order # Outputs Gain (1-9) (10-up)
A 33-8715 1 30dB $18.49 $17.34
B 33-8720 2 25dB 19.49 17.68
C 33-8725 4 20dB 20.49 18.58
A B
C
Broadband Structured Wire RF Amplifiers
Compatible with the market leader of structured wiring panels, these 5~1000MHz,
DOCSIS
®
compliant amplifier modules are the ideal drop-in replacement
for CATV in-home signal distribution. Improve your multimedia application with
the latest broadband technology for HDTV QAM signals. Features include
a durable, salt-spray-resistant housing, weather-sealed
“F” ports, and exceptional surge performance.
Order # Description Gain ONLY
33-10225 6 output +6.5dB gain $88.99
33-10226 8 output +10.0dB gain 101.00
Multiple Dwelling Amplifier
Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm General:
•Power requirements: •Voltage(d): 117VAC, ±10%, 24
•Frequency: 60Hz •Power: 13W •Mfr. #ACA 30-550
Order # ONLY
33-2875 $302.00
High Headroom
Distribution Amplifier
The DA-550s can handle an
extremely wide range of
input signals from both
NTSC and digital HDTV.
With outputs to eight
televisions, coax runs up to
150', three inputs, one from
a CATV or antenna and two
from modulators, the
DA-550 is the heart of a
multi-room distribution
system. The DA-550BID
offers a 5~42MHz return
path for bi-directional
communication for use with
cable modems and pay-per-view applications. The
DA-550HHR is used with high performance antenna
applications for off air digital and NTSC signals.
Additional features: IR engine, remote power and
expandable outputs.
Order # ONLY
DA-550BID $171.00
DA-550HHR 171.00
#DA-550BID
#DA-550HHR
RF Distribution Amplifier
For systems with up to eight
TV outlets and cable lengths
up to 150'. The DA-8200
series provides outputs to
eight televisions, three inputs
from an off–air antenna or
CATV and two modulator
locations. May be remotely powered from up to 75'
away by using a remote wall plate model 2010 or any
5500 series or SVM series modulator.
Order # Description ONLY
DA-8200BID Bi–directional amplifier $171.00
DA-8200HHR High head–room amplifier 171.00