Technical Specs

6
www.usautomatic.com
Keypad Dipswitches -This keypad has virtual dipswitches
The virtual dipswitch contains nine 3-position switches. The default Security Code
has all nine switches in the center position. To ensure neighboring keypads do not
interfere with each other, the virtual switches should be positioned in a random
pattern, using the following procedure.
Example of random positioning of the virtual dip-switches to create a Security
Code
To enter the Security Code, enter the dip-switch number, followed by the dip-switch
position character. The Security Code would be entered as:
1# 20 3* 4* 5# 6* 7# 80 9*
Dip pos.
1 2 3 4 5 6 7 8
9
# X X X
0 X X
*
X X X X
Switch number
Use table below to create a random pattern and enter the resulting Security Code in
the following procedure.
Dip pos.
1 2 3 4 5 6 7 8
9
#
0
*
• Enter the Master Password.
•
Enter “6”. If correct, 2 short beeps (if 1 long beep is heard, start over with first
step);
•
Enter the Security Code created in the table in the previous column. If correct,
2 short beeps after each switch number and switch position combination is entered.
•
Enter “#”.
•
Enter “6”. If correct, 2 short beeps (if 1 long beep is heard, start over with first
step).