User's Manual

1A - General information
The radiocontrol RCS-433LT has been designed for the
programmable telephone entry systems, anti-burglar systems
and access control systems.
It has a very high security coding system. (KeeLoq ® Hopping
code).
The code sent by the transmitter changes at each activation,
avoiding any scanning and copying risk. A special algorithm
1A - General information
1B - Technical specifications
1C - Main features
1 - TRANSMITTER INTRODUCTION
2 - CODING
3 - MEMORIZATION
4 - BATTERY ACCESS
5 - TROUBLESHOOTING
G
ETTI
N
G
START
ED
1B - Technical specifications
Number of keys: 2 / 4
Supply : 1 Alkaline Battery 12V type 23A
Battery life: 12 - 18 months
Current consumption : 25 mA
Operating frequency : 433.92 MHz
64
Code combinations : 2
Modulation : AM / ASK
Rated e.r.p. : 50 - 100 mW
Range in free space: 60 - 120 yd
Operating temperature: -20 ÷ +55 °C
Overall dimensions: 3.26 x 1.88 x 0.62 in
Weight: 20 gr.
allows to keep synchronyzed transmitter and receiver.
The operating frequency is 433,92 MHz.
The receiver RCS-433R type SELWR433, which operates with this
transmitter, has a Wiegand 26 bit format output, suitable with
any type of access control system, equipped with this type of
protocol.
The 23A Alkaline battery has a life of about 18 months.
The product fully complies with the European Directives
99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC
1C - Main features
Push-button
C
Red
LED
CONTENTS
Thank you for choosing a RCS product. You are recommended to
read this manual carefully before installing the product.
RCS
Push-button
A
Push-button
B
Push-button
D
Battery
door
Key holder
ring
RCS - 433LT
RCS-433LT2
RCS-433LT4