manual

9
Starting a programme
• Press the Power button (the end of programme light will be switched
on)
• Press the Programme Selection button until the required
programme is shown on the display.
• If required, set the delay timer by pressing the Delay Timer button
• Once a programme is selected, the end of programme light will
switch o.
• When you close the dishwasher door, the programme will start
automatically.
Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply
press the Programme Selection button.
Additional information
If you have selected any extra function (3 in 1, prewash, half-load) for a
programme, this function will automatically be selected the next time
the dishwasher is used. To cancel the selection of any extra function,
press the specific extra function button (5, 6 or 7) until the indicator
light for that function goes out.
According to ecodesign regulations, when the dishwasher is switched
o, the Eco programme will be selected automatically when the
dishwasher is next switched on. All extra functions will also be
cancelled when the dishwasher is switched o.