manual

14
Failure Codes and Troubleshooting
The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.
Error Code Error description Advice
Water leakage has been detected
• Turnothedishwasheranddisconnectthewatersupply
• ContactCDACustomerCare
The waste water cannot be
discharged
• Drainhoseisblocked
• Theltersofyourmachinemightbeblocked
• Restartthedishwasherandcanceltheprogramme
• Iftheerrorcontinues,contactCDACustomerCare
Continual fill error • ContactCDACustomerCare
Faulty flow meter • ContactCDACustomerCare
Inadequate water supply
• Makesurethewatertapisfullyopen
• Closethewatertap,separatethewaterinlethosefrom
the tap
and clean the filter.
• Restartthedishwasher.
• Iftheerrorcontinues,contactCDACustomerCare
Faulty NTC • ContactCDACustomerCare
Water temperature too high • ContactCDACustomerCare
Heater error: Inadequate heat • ContactCDACustomerCare
Diverter position problem • ContactCDACustomerCare
Alarm is active against water
overflow
• ContactCDACustomerCare
Electronic card parameter faulty • ContactCDACustomerCare
Electronic card water hardness
faulty
• Checkthewaterhardnessissetforyourwatersupply
• Iftheerrorcontinues,contactCDACustomerCare
Faulty turbidity sensor • ContactCDACustomerCare