Specifications

JCM Part No. 960-000058R_Rev. 2 © 2008, JCM-American Corporation
24
Section A EBA-03 Bill Validator
If the Acceptor does not accept a bill, count how
many times the Red LED flashes to determine the
possible malfunctions requiring correction
(See Table A-2 in Error Codes on this page).
If the Acceptor rejects a bill, count how many
times th
e Gree
n LED flashes to determine the
possible malfunctions requiring correction
(See Table A-3 in Error Codes on this page).
Error Codes
If the EBA-03 does not operate properly during the
various tests, the Red and Green LED’s on the
CPU board will flash. Count the number of Red
flashes and refer to the Error Code listing in Table
A-2 to determine the possible cause of the prob-
lem, or count the number of Green flashes and
refer to the Rejection Code listing in Table A-3 to
determine the possible cause of the problem.
Table A-2 Red LED Error Codes
No. of Red
LED Flashes
Error Description
1 Reserved
2 Reserved
3 Reserved
4 A bill has stopped in the bill path
5
Acceptor motor speed error
Acceptor Sensor out of adjustment
6
Acceptor motor does not rotate
Acceptor Sensor malfunction
No signal from the Encoder Sensor
7 Reserved
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Timing error (Tampering)
Table A-3 Green LED Rejection Codes
No. of Green
LED Flashes
Error Description
1 Crooked Bill Insertion
2 Reserved
3 Bill Jam
4 Optical sensor error 1(Bill size error)
5 Bill feed error
6 Identification error 1(Near error)
7 Optical sensor error 2 (Pattern error)
8
Optical sensor error 3 (Photo level
err
o
r)
9 Unacceptable bill returned (Inhibit error)
10 Reject signal input
11 Reserved
12 Back sensor error
13 Bill length error
14 Optical sensor error 4 (Infrared error)
15
Optical sensor error 5 (Unrecognizable
bi
ll)