Specifications

JCM Part No. 960-000058R_Rev. 2 © 2008, JCM-American Corporation
8
Section 2 EBA-03 Bill Validator Installation / Operation
Pin Assignments
Table 2-1 Serial I/F (ID-044C) Pins Assignments
Pin Signal
No.
Signal Name I/O
Active
Description
1 Vdd Power supply 12V (±5%)
2 Vss GND
3 DATA Output Low The output terminal for communications data
4 CTS Input Low
The transmission authorization signal for comm-
unication data
5 Vss GND
6 Vcc Power supply 5V (±5%)
MAX 20m
A
7 BUSY Output Low The output signal indicating the validator is functional
8
DISABLE/
ENABLE
Input Low
The
signal for disabling (High) and enabling (Low) the
registering of bills
9 RTS Output Low
The signal for confirming the commencement of
communications data
10 NC
Table 2-2 Pulse
I/
F (ID-044C) Pins Assignments
Pin No. Signal Name I/O Active Description
1 Vdd Power supply 12V (±5%)
2 Vss GND
3 VEND Output Low Registered bill type signal (pulse signal)
4 NC
5 Vss GND
6 Vcc Power supply 5V (±5%) MAX 20m
A
7 BUSY Output Low The output signal indicating the validator is functional
8
DISABLE/
ENABLE
Input Low
The signal for disabling (High) and enabl
ing (Low) the
registering of bills
9 NC
10 NC
Table 2-3 Bi-direc
ti
onal Serial I/F (ID-003) Pin Assignments
Pin No. Signal Name I/O Active Description
1 Vdd Power supply 12V (±5%)
2 Vss GND
3 TXD Input Output signal line from acceptor
4 RXD Output Output signal line from controller
5 Vss GND
6 Vcc Output Power supply 5V (±5%) M
AX 20m
A
7 NC Leave unconnected
8 NC Leave unconnected
9 NC Leave unconnected
10 NC Leave unconnected
CN1
CPU Board
9 1
10 2