Specifications

JCM Part No. 960-000058R_Rev. 2 © 2008, JCM-American Corporation
3
General Information EBA-03 Bill Validator Section 1
Precautions
The Figure 1-3 symbols are defined as follows:
1. (Type 1) Do not insert a torn, folded, o
r wet
bill, as this action may cause a bill jam inside
the unit.
2. (T
ype 2) Do not expose the unit to water.
The unit contains several precisi
on elec-
tronic devices which can be damaged if
water or any liquid is sprayed or sp
illed into
the unit.
3. (Type 3) Do not install the unit into a dusty
environment. Dust may af
fect the sensor’s
performance.
Dimensions
Figure 1-4 illustrates the typical EBA-03 external
dimensions in millimeters.
Type 1 Type 2 Type 3
Figure 1-3 Precautionary Symbols
Figure 1-4 EBA-03 Bill Validator Dimensions
All Dimensions are in Millimeters