Specifications

JCM Part No. 960-000058R_Rev. 2 © 2008, JCM-American Corporation
2
Section 1 EBA-03 Bill Validator General Information
Specifications
Table 1-1 lists the EBA-03 General Specifications.
Primary Component Parts
Figure 1-2 illustrate the Primary Component Part names for the EBA-03.
Table 1-1 General Specifications
Condition Function
Acceptable denominations: DIP Switch selectable
Insertion direction: Four-way
Acceptance rate: 90+% in normal acceptance mode.
(Exclusions would include bills containing contamination, having
excessive wear, wet, or torn, and those with their corners or ends
folded, dimensions altered or print significantly different than reference
note.
Validation time: Approximately two (2) seconds
(Time from insertion to output of credit pulse or storage verification)
Power: DC +12V (± 5%)
Power consumption: In standby: 2.5 VA
In Operation: 6.0 VA (Max. 10 VA)
Operating environment: Operating temperature:
5°C - 50°C (41°F - 122°F)
Storage temperature:
-20°C - 60°C (4°F - 140°F)
Humidity:
30% - 85% RH (non-condensing)
Light sensitivity:
Must not be exposed to direct sunlight
Installation: Indoors only
Dimensions: See dimension drawings on Page 4 for further detail
Weight: approximately 0.6 Kg (1.32 lb.)
Installation: Horizontal
Figure 1-2 EBA-03 Primary Component Parts