Specifications

72 VM-Series Deployment Guide
Deploy the VM-Series NSX Edition Firewall Set Up a VM-Series NSX Edition Firewall
Step 3 Apply the policies to the VM-Series NSX
edition firewalls.
1. Click Commit, and select Commit Type as Device Groups.
2. Select the device group, NSX Device Group in this example and
click
OK.
3. Verify that the commit is successful.
Step 4 Validate that the members of the
Dynamic Address Group are populated
on the VM-Series firewall.
Note You cannot verify the members
(registered IP addresses) for the Dynamic
Address Group on Panorama. This
information can only be viewed from the
VM-Series firewall that enforces policy.
1. From Panorama, switch device context to launch the web
interface of a firewall to which you pushed policies.
2. On the VM-Series firewall, select
Policies > Security, and select
a rule.
3. Select the drop-down arrow next to the address group link, and
select
Inspect. You can also verify that the match criteria is
accurate.
4. Click the
more link and verify that the list of registered IP
addresses is displayed.
Policy will be enforced for all IP addresses that belong to this
address group, and are displayed here.
Step 5 (Optional) Use template to push a base
configuration for network and device
configuration such as DNS server, NTP
server, Syslog server, and login banner.
Refer to the Panorama Administrator’s Guide for information on
using templates.
Define Policy on Panorama