Specifications

70 VM-Series Deployment Guide
Deploy the VM-Series NSX Edition Firewall Set Up a VM-Series NSX Edition Firewall
Define Policy on Panorama
Step 1 Create Dynamic Address Groups. 1. Log in to the Panorama web interface.
2. Select
Object > Address Groups.
3. Select the
Device Group that you
created for managing the VM-Series NSX edition firewalls in
Create a Device Group and Template on Panorama.
4. Click
Add and enter a Name and a Description for the address
group.
5. Select
Type as Dynamic.
6. Click
Add Match Criteria. Select the And or Or operator and
select the next to the security group name(s) to match
against.
Note The security groups that display in the match criteria dialog
are derived from the groups you defined in the Service
Composer on the NSX Manager. Only the security groups
that are referenced in the security policies and from which
traffic is redirected to the VM-Series firewall are available
here.
7. Click
OK.
8. Repeat Steps 4-7, to create the appropriate number of Dynamic
Address Groups for your network.
9. Click
Commit.