Specifications

66 VM-Series Deployment Guide
Deploy the VM-Series NSX Edition Firewall Set Up a VM-Series NSX Edition Firewall
Create Policies
The following topics describe how to create policies on the NSX Manager to redirect traffic to the VM-Series
firewall and how to create policies on Panorama and apply them on the VM-Series firewall so that the VM-Series
firewall can enforce policy on the traffic that is redirected to it.
10. Access the Panorama web interface to make sure that the VM-Series firewalls are connected and synchronized with
Panorama.
a. Select
Panorama > Managed Devices to verify that the firewalls are connected and synchronized.
b. Click
Commit, and select Commit Type as Panorama.
Note A periodic Panorama commit is required to ensure that Panorama saves the device serial numbers to
configuration. If you reboot Panorama without committing the changes, the managed devices will not
connect back to Panorama; although the Device Group will display the list of devices, the devices will not
display in
Panorama > Managed Devices.
11. Verify that the capacity license is applied and apply any additional licenses that you have purchased. At a minimum,
you must activate the support license on each firewall.
a. Select
Panorama > Device Deployment > Licenses to verify that the VM-Series capacity license is applied.
b. To apply additional licenses on the VM-Series firewalls:
1. Click
Activate on Panorama > Device Deployment > Licenses.
2. Find or filter for the firewall, and in the Auth Code column, enter the authorization code for the license to
activate. Only one authorization code can be entered at a time, for each firewall.
3. Click
Activate, and verify that the result of the license activation was successful.
Deploy the Palo Alto Networks NGFW Service