Specifications

VM-Series Deployment Guide 65
Set Up a VM-Series NSX Edition Firewall Deploy the VM-Series NSX Edition Firewall
5. Select the port group that provides management network traffic access to the firewall.
6. Select the IP address pool from which to assign a management IP address for each firewall when it is being deployed.
7. Review your configuration and click
Finish.
8. Verify that the NSX Manager reports the
Installation Status as Successful. This process can take a while; click the
More tasks link on vCenter to monitor the progress of the installation.
Note If the installation of VM-Series fails, the error message is displayed on the Installation Status column. You can
also use the
Tasks tab and the Log Browser on the NSX Manager to view the details for the failure and refer to
the VMware documentation for troubleshooting steps.
9. Verify that the firewall is successfully deployed and that it is connected to Panorama.
In the vCenter server, select
Hosts and Clusters to check that every host in the cluster(s) has one instance of the
firewall.
Deploy the Palo Alto Networks NGFW Service