Specifications

VM-Series Deployment Guide 31
Set Up a VM-Series Firewall on the Citrix SDX Server Install the VM-Series Firewall on the SDX Server
Install the VM-Series Firewall on the SDX Server
A support account and a valid VM-Series license are required to obtain the .xva base image file that is required
to install the VM-Series firewall on the SDX server. If you have not already registered the capacity auth-code
that you received with the order fulfillment email, with your support account, see Register the VM-Series
Firewall. After registration is completed, continue to the following tasks:
 Upload the Image to the SDX Server
 Provision the VM-Series Firewall on the SDX Server
Upload the Image to the SDX Server
To provision the VM-Series firewall, you need to obtain the .xva image file and upload it to the SDX server.
Upload the XVA Image to the SDX Server
Step 1 Download and extract the base image zip
file to a local computer.
1. Go to https://support.paloaltonetworks.com/ and download
the
VM-Series Citrix SDX Base Image zip file.
2. Unzip the
base image zip file, and extract the .xva file.
This .xva file is required for installing the VM-Series firewall.
Step 2 Upload the image from the local
computer onto the Citrix SDX server.
1. Launch the web browser and log in to the SDX server.
2. Select
Configuration > Palo Alto VM-Series > Software
Images
3. In the Action drop-down, select Upload... and Browse to the
location of the saved .xva image file.
4. Select the image and click
Open.
5.
Upload the image to the SDX server.