Specifications

15
• Push the supplied copper stub pipe/⅜”BSP adaptor into the
water inlet of the filter (The direction arrows on the top filter
moulding should point AWAY FROM this fitting), this should
lock into position.
• Connect the remaining (longest) braided hose from the tap
itself onto the stub pipe.
G3/8"
OUT TO
HEATER TANK
THROUGH FILTER
G1/2"
DOMESTIC
HOT IN
(RIGHT HAND
HOSE) RED
G1/2"
COLD IN
(HOSE AT
REAR) BLUE
O 5 I.D
SILICONE TUBE
FROM TANK
2
2
5

2
3
0
m
m
C
T
R
S
O 35mm
HOLE
325mm
Fig. 2