Specifications

32
TELESCOPIC SLIDING SHELF SUPPORTS (SUPPLIED WITH SOME MODELS ONLY)
The telescopic sliding shelf supports make it safer and easier to insert and remove the
oven shelf and tray. They stop when they are pulled out to the maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
– The slides to the top wire of a rack. They do not fit on the lower wire.
– The slides so that they run out towards the oven door.
– Both sides of each pair of shelf slides.
– Both sides on the same level.
TO FIX THE SLIDING SHELF SUPPORT ONTO THE SIDE RACKS:
– Screw the side racks onto the oven walls (and the catalytic liners if supplied) (Fig.
9.3)
– Fit the sliding shelf support onto the top wire of a rack and press (Fig. 9.4). You will
hear a click as the safety locks clip over the wire.
Left
Right
Fig. 9.4