Specifications

31
Fig. 9.2
MODELS WITH WIRE RACKS
• Assemble the wire racks to the oven
walls using the 2 screws (Fig. 9.3).
In the models with catalytic panels
interpose the catalytic panels A with
the arrow up (Fig. 9.3).
Models with rotisserie: The catalytic
panel with the hole for the rotisserie
must be positioned on the right oven
wall. DO NOT INTERPOSE THE CAT-
ALYTIC PANEL WITHOUT THE HOLE
ON THE RIGHT OVEN WALL.
• Slide in, on the guides, the shelf and
the tray (fig. 9.2).
The shelf must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
• To dismantle, operate in reverse order.
Fig. 9.1
MODELS WITH EMBOSSED CAVITY
The oven shelf is provided with a securi-
ty block to prevent accidental extraction.
It must be inserted operating as per fig-
ure 9.1.
To pull it out operate in the inverse order.
OVEN FITTING OUT
A A
Fig. 9.3
HOLE FOR ROTISSERIE
(SOME MODELS ONLY)