Specifications

33
D
G
Fig. 4.27
Fig. 4.24
Fig. 4.23
E
F
Fig. 4.26
H
Fig. 4.25
REASSEMBLING THE INNER PANE
To reassemble the inner pane of the
oven door operate as follows:
– Make sure the door is locked open
(see Fig. 4.20).
– Check the correct positioning of the
no. 4 (four) silicon rubbers D (fig. 4.23).
– Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
– Insert the inner pane in the left E and
right F side guides (fig. 4.24) and gen-
tly let it slide up to the retainers H (fig.
4.25).
– Reassemble the seal G in the correct
way (fig. 4.26) by hooking the no. 3
fixing hooks in the proper holes (fig.
4.27).
– Open completely the oven door and
close the lever A on the left and right
hinges (fig. 4.28).
A
Fig. 4.28
It is normal the opened gap between the
top edge of the inner glass and the sealed
gasket. This allows the cooling air
circulation.
The oven door
has a sealed
gasket in the
top part.