Specifications

Designed to be dependable, this series incorporates
2/1 standard Gastronorm tray and shelf width/depth
dimensions and door locks as standard.
Generic Specifications
Interior: stainless steel sides, rear ducting
and coved floor
Coved floors for easy cleaning
Easy to clean, ergonomic horizontal handles
Easy plug-in, 10 Amp power supply
(230-240V, 50Hz)
2 shelves and adjustable tray slides
w530 x d650mm per door as standard
Self-closing and self-sealing doors
Replaceable, long-life magnetic door gaskets
Heated cabinet fascia to eliminate condensation
Electronic controller with digital
temperature display
Key locks on all doors
System overheat protection fitted
Insulation: 60mm thick, high density
cyclo-isopentane polyurethane foam
(CFC, HCFC & HFC free)
Refrigeration system protected from corrosion by
an anti-corrosive blue coating treatment
Fan-forced ducted air flow for even and
consistent temperatures
Adjustable legs and castors supplied as standard
or optional plinth, please specify when ordering
Optional 50mm square edged stainless
steel countertop
Reduced countertop available on prep cabinets
for placement under your counter
Interior lighting activated by door opening not
available as standard
Front breathing system enabling cabinets to be
built flush against back & side walls
Integral System Specifications
Left-hand side mounted, removable SKOPE
Cyclone refrigeration system as standard
with right-hand option
Plumbing free design
Integral Chiller Specifications
R134a refrigerant (CFC & HCFC free)
Integral chiller product operating temperature
+1°C to +4°C up to 43°C ambient
Integral Freezer Specifications
R404A refrigerant (CFC & HCFC free)
Freezer product operating temperature
-18°C to -21°C up to 43°C ambient
Remote System Specifications
Evaporator box and service compartment on
left-hand side as standard with right-hand option
Evaporator drain fitted (requires plumbing)
Thermostatic expansion valve fitted
as standard (to suit R134a or R404A
please specify when ordering)
Pizza and Preparation R404A valve fitted
as standard
Pipework and drain exit inside service
compartment at the front of the unit
for easy access
Mains flex exit through base, 3-core flexible
cord with plug
See Remote Refrigeration System Specifications
on page 124 for more information
Drawing depicts: PG500HC
Optional 52mm countertop included in cabinet height and 34mm plinth - total height 771. Height excludes
legs or adjustable castors. Adjustable front locking swivel castors (115-130mm high) - total height 800-815mm
without countertop or plinth. Adjustable legs (150-180) - total height 835-865mm without countertop or plinth.
PEGASUS HORIZONTAL 2/1 SERIES FEATURES
1750
27