Operating instructions

57
J
Fig. 59
Injectors replacement of
top burners
Every cooker is provided with a set of
injectors for the various types of gas.
Injectors not supplied can be obtained
from the After-Sales Service.
Select the injectors to be replaced
according to the table at page 59.
The nozzle diameters, expressed in
hundredths of a millimetre, are marked
on the body of each injector.
To replace the injectors proceed as fol-
lows:
– Remove the grids and extract the
burner bodies.
– Using a wrench, substitute the nozzle
injectors “J” (Figs. 58 - 59 - 60) with
those most suitable for the kind of
gas for which it is to be used (see
“Table for the choice of the injec-
tors”).
The burners are constructed in
such a way so as not to require the
regulation of the primary air.
J
Fig. 58
Conversion to Natural Gas or to LPG
Semi-rapid
burner
Triple-ring
burner
DUAL
burner
J
Injector for inner crown
J
Injectors for
outer crowns
Fig. 60