Technical data

10
“Touch-Control” Keys
The “touch-control” keys shall be operated by the ngers (just by touching the key). When using touch controls
it is best to use the ball of your nger rather than the tip.
The keys are automatically deactivated:
- 8 seconds after the last selection; the deactivation is indicated by an acoustic signal (“beep”).
To reactivate just touch the “MODE” key or the “+” and “–” keys.
Setting the Clock
When rst connected, or after a power failure, the digits and “AUTO” will shown on the display. To set the clock,
touch the “MODE“ key, for more than 2 seconds, and then the “+” or “–” keys.
Important: The oven does not operate, in manual cooking, without rst having set the clock.
To set the clock, with the appliance already connected, touch the “+” and “–” keys simultaneously (for more
than 2 seconds), then “+” or “–” keys.
Important: - changing the time will delete any automatic programme;
- after setting the clock, the oven starts to operate in the selected function (manual
cooking). The “ ” symbol is steady illuminated.
Using the Timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven o.
The timer can be set for up to 23 hours and 59 minutes.
- To set the timer, touch the “MODE” key for more than 2 seconds (the “ ” symbol ashes), than the “+” or “–”
keys.
- After about 8 seconds an acoustic signal (“beep”) will sound conrming the regulation (“ ” symbol steady
illuminated).
- To check the remaining time touch the “MODE“ key for more than 2 seconds. If the remaining time is more
than a minute the display will show hours and minutes; if less than a minute the display will show seconds.
- When the time is up, the timer will beep. Touch the “MODE” key , for more then 2 seconds, to turn it o; or
press the “+” or “–” key to stop the beep and than the “MODE” key, for more than 2 seconds, to deactivate the
“ ” symbol ashing on the display.
- Turn o the oven manually (function and thermostat knobs in the o position) if the manual cooking has
been completed.
Setting the Timer Volume
You can select from three volume levels.
- Touch the “+” and “–” keys simultaneously for more than 2 seconds.
- Touch the “MODE” key; you can read on the display the current timer volume (“ton1”, “ ton2” or “ton3”).
- Touch the “–” key to listen or change the timer volume.
- Timer volume activated: the last displayed.
- After about 8 seconds an acoustic signal (“beep”) will sound conrming the volume setting; then the time of
day will be displayed.