PC50 American Style Fridge Freezer Manual for Installation, Use and Maintenance Passionate about style 1 Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.
Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance.
Important • Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance. • This is a household appliance, which is produced in accordance with the national standard. It is intended for food storage only, not for storage of blood, medicine and biological products. • To prevent risk of fire, keep the appliance away from petrol or any other inflammables.
Before First Use You must allow the fridge to settle for at least twenty four hours prior to switching the power on. It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly dry the interior. The fridge may have an odour to it at first use. This will disappear as the appliance cools.
Use Fridge • Never put liquids in the fridge uncovered. • Never put hot foods in the fridge. Warm food should be allowed to cool to room temperature before being put into the fridge. • Nothing should rest against the rear wall of the fridge, as this will cause frost and possible condensation problems which will be difficult to remove. • Make sure food is clean and any extra water is wiped away before putting into the fridge. • Wrap or cover food before putting into the fridge.
Control Panel 1 2 1. Freezer temperature key 2. Fridge temperature key 3. Mode key 4. OK & lock/unlock key fig. 2 3 4 Setting the freezer temperature Touch the “Freezer temperature” key (1) so the freezer temperature on the display flashes. Then touch the “Freezer temperature” key again. The temperature will cycle on the display with each touch of the key from -16ºC to -24ºC before returning to -16ºC.
is extinguished. Once the function is switched off, the symbol will no longer show on the display and the appliance will return to the temperatures set previously. IMPORTANT Do not use the “super freeze” function for more than 48 hours at a time. Super refrigeration function The “Super refrigeration” function can be used to maintain the fridge temperature when large quantities of fresh food are introduced into the fridge.
Installation and Ventilation This appliance must never be installed close to heat sources i.e. heating elements, cookers or in damp places 750 Failure to provide adequate ventilation can lead to increased running costs and premature failure and may invalidate the warranty provided with the product. 1760 • Ensure ventilation openings are kept clear. • Do not use a multi-purpose socket alongside other appliances. • Do not tilt the fridge beyond 45º. • Do not exert excessive pressure on the appliance.
Care and Cleaning IMPORTANT: Turn off the ice maker using the ice off key on the control panel before removing the ice compartment for cleaning. Always disconnect the appliance from the power before any cleaning or maintenance. • • The refrigerator and freezer sections should be cleaned using a solution of bicarbonate of soda and lukewarm water. Do not use abrasive products or detergents. After washing, rinse and dry thoroughly. • Clean the shelves and balconies separately by hand using soap and water.
Troubleshooting If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care to prevent unnecessary service calls and potential cost. If the appliance is not working: • Check there is power to the appliance. • The house fuses are intact and the fuse in the plug has not blown. • The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the socket is working.
Electrical Information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 Amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover. 3. Replace fuse cover. Important: Do not use the appliance without the fuse cover in position.
To contact our Customer Care Department, or for Service, please contact us on the details below. Passionate about style 12 Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.
