User`s guide

Add-On/Microcode Upgrade

77 A7 48UU Rev03 5-3

5.1.1 Step 1

To estimate the installation time, perform the following operation:

1. Build a new configuration file under MNCONF as follows:

S:FGF

......

F:MNCONF

......

N:MD <OLDCONF> <NEWCONF> CDA7

IMPORTANT:

There are a certain number of standard configurations. In an add-on operation,

the rule is as follows:

Config standard XX+Add-On=Config standard YY

Whatever the type of add-on, you will encounter a known configuration.

2. Perform the LABEL command, it displays:

− the distribution of new disks in the Lap-Top configuration,

− the name of the new standard configuration obtained ("BIN" file).

The following message is displayed:

Lap top configuration dor cda #01

Name of the bin file is: C4000-20 for 5130 model

or D4000-20 for 5330 model

MS * 01 02 03 04 05 06 09 0A 0B 0C 0D 0E

DEV * 00 01 02 03 04 05 06 07 08 09 0A 0B

********************************************************

SA-15A * 20 21 22 23 24 25

B * 20 21 22 23 24 25

C *

D *

SA-16A * 20 21 22 23 24 25

B * 20 21 22 23 24 25

C *

D *

********************************************************

***LABELS for other 10 controllers