User`s guide

CDA 7 Maintenance Manual
3-6 77 A7 48UU Rev03
2. Select the Mark a Volume option or enter A.
CDA7 5330 version
CDA7 5630 version
3. A window is displayed. Highlight the Turn LED ON option and press Enter
to select it. A window is displayed.
Highlight the Single Device option and press Enter to select it. A dialog box
displays the following message: Enter Entire Device Number to Mark.
5. Enter a four digit number. From the right to the left:
the first digit is 1 for a data or mirror 1 disk
or 2 for a mirror 2 or parity disk
three last digits is the number of the disk-drive (DV)
E
XAMPLE:
To turn ON the LED of the mirror disk-drive 0: enter 1000. The LED turns ON as
shown in the following figure.