User`s guide

Installing the CDA 7 5630 with Microcode Release 5265
77 A7 48UU Rev03 F-37
EXAMPLE 3 WITH COUPLING:
This is a configuration of 16 mirrored disks belonging to a cabinet in another
installation. The connection of the coupled disks is shown in the label of System 0.
External identifier
Iom WSP-R slot 19 PX47
port 0 connected to Scsi Adaptor slot 0 port D cda #01 other instal
Iom WSP-R slot 08 PX10
port 0 connected to Scsi Adaptor slot 2 port D cda #01 other instal
From To
*MB2-0-19-2 * *MC1M SA d-DA * *MB2-1-08-2 * *MC3M SA 2-D
*inst #0 * *inst #1 * *inst #0 * *inst #1
* * *MS YH * *MS YI * *MS YJ * *MS YK
* * *MSYL * *MS YM * *MS YN * *MSYP
The Port switches on the SCSI adapters must be set to Enable and Termpower must
be set to VCC. See Rear Card Cage - SCSI Adapter Switch Positions in the
Introduction which is also followed by information on the correct way of
connecting the cables (figure SCSI Cable Connection.)
❑